NEW - The SRB split plummer block bearing

Retained Type Bearings (BR)

Expansion Type Bearings (BX)

This bearing has integral lips on the outer race to provide a surface for axial load. This axial load is accommodated on the inner race via the hardened clamp rings, which both align the inner race halves and provide roller guidance. In larger bearings the inner race is manufactured with integral ribs for roller guidance and axial load

This bearings is designed for radial loads only. As in the retained type bearing, the rollers are guided on the inner race by the hardened shoulders of the clamping rings

This type of bearings will locate the shaft axially as well as provide a means for taking axial load. The retained outer race must be fixed sideways against one of the housing grooved shoulders using the pins and screws provided. Only one retained unit should be mounted on any particular shaft. Additional care should be taken when mounting split rolled bearing unit on shafts using other, non-split types of bearings 9ball, cylindrical and spherical roller etc.) to ensure there are no other locating bearings used

During expansion or contraction of the shaft, rollers are free to move across the plain outer race offering virtually no resistance to axial movement. Limits for the amount of axial movement are given in the Assembly and Maintenance section